360彩票

GP102 pressure reducing regulator

GP102 pressure reducing regulator

Pressure reducing regulator is a form of self-energy pressure regulating device. It can reduce the inlet pressure to a certain required outlet pressure, and can automatically keep the outlet pressure basically unchanged.

  • GP102 Product model: GP102
  • DN 15-400 mm Specifications: DN 15-400 mm
  • 6.4 MPa(64Barg) Maximum allowable pressure: 6.4 MPa (64Barg)
  • 90℃ Maximum allowable temperature: 90 ℃
  • 弹簧活塞式 Structure: spring piston
  • 铸钢、不锈钢 Body material: cast steel, stainless steel
  • 法兰 Connection method: flange
  • GB、HG、DIN、ANSI Connection standards: GB, HG, DIN, ANSI
  • 水、油品、空气等非腐蚀性液体 Use medium: water, oil, air and other non-corrosive liquids

The pressure reducing and pressure reducing valve is a valve that reduces the inlet pressure to a certain required outlet pressure and maintains stability through adjustment. Compared with the thin film type, it has low sensitivity and high manufacturing process requirements, and is suitable for air, water, oil, steam and other media. GP104 piston pressure reducing valve is used for higher temperature
Structural features · Long service life, no problems with diaphragm damage
·High pressure
Small size for easy adjustment
良好的耐久性 · Good durability

使用范围较广 Wide range of use


减压稳压阀尺寸图

Performance

Nominal pressure
Operating temperature
Inlet pressure
Outlet pressure
Minimum pressure difference
1.6MPa
≤90 ℃
< 1.6MPa 0.2-1.0MPa
0.2 MPa
2.5 MPa ≤90 ℃ 2.5 MPa 2.5 MPa 0.3-1.6 MPa 0.2 MPa
4.0 MPa ≤90 ℃ 4.0 MPa 4.0 MPa 0.3-2.5 MPa 0.2 MPa
6.4 MPa ≤90 ℃ 6.4 MPa 6.4 MPa 0.3-3.0 MPa 0.25 MPa

Dimensions

DN
20
25
32
40
50
65
80
100
125
150 200 250 300 350 400
L 1.6 / 2.5MPa
160
180
200
220
250
260
310
350
400
450 500 600 800 850 900
4.0 MPa 160 200 220 240 270 280 330 380 450 500 550
6.4 MPa 170 200 220 240 270 300 330

 

Regardless of the packaging method, the principle is to protect the pressure reducing valve from damage.
1. Packaging method Packaging materials for finished products are sacks, woven bags, wooden boxes or pallets. Which packaging material is used is determined by the contract or by the sales department based on the specific situation of the product, such as specifications, quantity, etc.
2. Packaging requirements The warehouse clerk shall perform delivery inspection in accordance with the "Product Delivery Sheet" and "Final Inspection and Test Operation Specifications" before packaging, and confirm the packaging before packaging.
Sack or woven bag
a Single packaged valve product should be packed in a bag of appropriate size, and then tied and tied with a rope;
b The outside of sacks and woven bags should indicate the arrival, delivery unit, product name, model, specifications, and number of this batch.
c When the valve leaves the factory, each pressure reducing valve There should be relevant technical documents such as product qualification certificate, product inspection report (specified in the contract), material quality certificate, and product manual (specified in the contract).
Wooden packing
a Before packing the valve, carefully check whether the model, specifications, quantity and certificate of compliance with the packing list.
b Single product packed in wooden cases. For heavier, medium-sized products. When packing, use foam or other methods to prevent the product from shaking.
c Multiple products packed in wooden cases. For small size, light weight and large number of products. Fill with foam or other soft materials when packing to prevent the products from colliding with each other during transportation.
d The iron box should be used around the wooden box to prevent the wooden box from being damaged during transportation.
e Each box should be accompanied by relevant technical documents such as the product certificate, packing list, product inspection report (specified in the contract), material quality certificate (specified in the contract), product specifications (specified in the contract), and fixed in the box Somewhere.
f The shipping marks outside the wooden box (address of consignee, address of consignee, consignor, etc.) should be neatly written and clear.